Journal

How to care for and clean a wooden lamp

By Cristina y Rafa3 min read

To care for a wooden lamp, unplug it and wipe it with a soft cloth, dry or only slightly damp, without wetting the wood or using harsh products. Once a year, give it a thin coat of oil to nourish it. Use only LED bulbs, which run much cooler, and keep it away from direct sun and heat. With that little care, the wood ages well and gains character.

Lit table lamp with an olive wood base and a light shade
Cleaning: a soft cloth, dry or only slightly damp. Never wet.
Oil: a thin coat, once a year.
Bulb: LED only, which runs much cooler.
Position: away from direct sun and sources of heat.

First things first: unplug it

Before cleaning or oiling your lamp, unplug it and wait until the bulb is cool. And never wet the socket, the cable or the switch: wood is looked after with a cloth, not with water.

Everyday cleaning

A soft cotton cloth, dry or very slightly damp (well wrung out), is all you need to remove dust. Wipe along the grain without rubbing hard. In textured areas, such as the cracks and hollows of driftwood, a soft brush helps.

Each piece has its own care instructions on its page, and some call for a dry cloth only. If in doubt, always start with the dry cloth.

Close-up of the grain of the olive wood in a lamp
The grain of olive wood, up close.

What to avoid

  • Bleach, ammonia or solvents: they can dull or stain the wood.
  • Spraying liquid on the lamp: it wets the wood and can reach the electrical parts.
  • Direct sun: it lightens the wood and dries it out over time.
  • Strong heat and humidity: next to a radiator or in an unventilated bathroom, wood suffers.

Oil: once a year

Wood is a living material and tends to dry out over time. Once a year it is worth nourishing it with a thin coat of oil, such as linseed oil or Danish oil.

Olive wood base with a marked grain and the Veta & Lux leather label
Well-kept wood keeps its grain and its tone.
  1. Unplug the lamp and wipe it with the dry cloth.
  2. Apply the oil with a lint-free cloth, in a thin coat, following the grain.
  3. Let the wood absorb it for a few minutes and remove the excess with another clean cloth.
  4. Leave it to rest until it feels dry to the touch before switching it on again.

A safety note: cloths soaked in linseed oil can heat up and even catch fire if left crumpled. Lay them out in the open air until completely dry, or soak them in water before throwing them away.

The bulb: LED only

Always use LED bulbs. They run much cooler than incandescent or halogen ones, which matters in a wooden lamp, and they last for many years. Check on the lamp's page which socket your piece uses (E27 or E14) and the maximum wattage it accepts, and stick to it.

Brass socket with a filament bulb on a wooden base
Brass socket and filament bulb.

Where to put it

Wood likes stable surroundings. Keep it away from direct sunlight, radiators and very damp places. If the lamp sits by a window, turn it from time to time so that only one side does not fade.

Wooden table lamp with a light shade on a bedside table
A wooden lamp by the bed.

If it has a linen shade

With a linen shade, the safest way to remove dust is a soft brush, and not to wet it. Linen marks easily, and it is better to prevent than to rub.

Close-up of a linen lampshade and the lamp's brass tube
Linen up close: a brush rather than water.

Wood that ages with character

Marks, cracks and variations in tone are part of reclaimed wood, and over the years the piece gains character. With this care, a wooden lamp can stay with you for a long time.

At Veta & Lux we make every lamp by hand in Malaga from reclaimed wood. See the available pieces in our collection, and if you want to know where each wood comes from, we tell you in materials and provenance.

Related pieces

Olive wood lamp for a decorative bulb

Olea

Olive wood table lamp for a decorative bulb.

325EUR